DuraPANEL7 - Panel-PC designed for HMI

The DuraPANEL 7” is a small size general purpose Panel PC designed for HMI, alarm systems and smaller automation applications in demanding environments. The Dura PANEL 7” features ten finger PCAP touch interface, built-in light-sensor and buzzer for auditory feedback. The DuraPANEL  7” is equipped with an Intel Celeron  J1900 processor capable of handling up to 8 GB DDR3 RAM, and the on-board graphics controller supports Intel HD graphics. The DuraPANEL 7” comes with four independent Ethernet ports, two USB 2.0 ports, one DVI-I port, one serial port (configurable) and dual galvanic isolated 24VDC power inlet – providing full redundancy for power failure. Finally, DuraPANEL 7” is available with three different frame options to accommodate a variety of installation options. The DuraPANEL 7” is IEC 60945 type approved.


CPU: Intel® Celeron® Processor J1900, 2.42 GHz (4 Cores / 4 Threads)
Chipset: Intel® processor Core, Graphics, Memory Controller, and I/O interfaces in a single system-on-chip (SOC) solution
Memory: 1 x SODIMM sockets with 1x 4GB DDR3L 1600MHz mounted
Hard Disk Drive: 80GB Intel® S3500 SSD SATA
Optional sizes 120GB /340GB SSD SATA III
Video: External Video out:
Intel® HD Graphics controller on-CPU
DirectX* 11 and OpenGL 4.0 compliant
Dual Independent display capable
1 x DVI-I video output connector
Audio: Built-in Buzzer (75-85 dB(A) / 1m)
Ethernet: 4 x 10/100/1000 Mbits/s Ethernet LAN on-board, (RJ45) with auto-negotiate
2 x Intel and 2 x Realtek
USB: 2 x USB 2.0 (max 0,5 Amp per USB, max 5 Watt total)
COM: 1 x RS232/422/485 (configurable)
OS: Windows 7, Windows 8, Linux

Display size: 7 inch LCD (TFT), IPS technology
Resolution: 800 x 480
Active area: 152 x 91 mm
View angle: 89° (T/B), 89° (L/R) (typical)
Luminance: 450 Cd/m2 (typical) Optional Ambient light sensor
Contrast ratio: 800:1 

Touch: (typical)10 finger PCAP touch (internal USB interface)
Front glass:Anti Reflection

18-34VDC Galvanic isolated
Optional Dual input DC power, Galvanic isolated
Power Consumption:Ptyp = 16 Watts, Pmax = 30 Watts

Operating Temperature: -15 to +55 °C
Storage Temperature: -25 to +70 °C
Relative Humidity: 8 to 95 % (non-condensing)

CE Mark:EN61000-6-2 
Marine:IACS E10 Rev. 6 & IEC 60945 Ed. 4
Shock:±5G, 10ms in accordance with IEC 60068-2-27
Certificates:DNV MR certificate

Size:218 (W) x 147mm (H) x 59mm (Depthbehind bezel)
Weight:App. 4 kg.
Optional Bracket:Desk/ceiling-and wall-bracket (VESA 75x75mm)
Optional Accessories:External fan for VESA mounting (option)


Henning Lotterud
PM Maritime- & Industrial-IT